
Add to Cart
1kHz 12V 20Ah Lifepo4 Deep Cycle Battery MSDS For LED Lighting
The battery protection board has a strong load capacity, BMS protection function: 4 battery-cell series protection, charging and discharging protection, hardware protection for discharge overcurrent and short circuit, software protection for overvoltage, undervoltage, temperature, overload, accurate SOC calculation, with automatic learning SOC function,
UART communication function which can read all battery data in real time, and online upgrade, compatible with Bluetooth interface, reserved switch to control the output of the protection board, and low temperature charging and heating function.
1. Smart battery packs 12V 20Ah advantage
2. Smart battery 12V 20A Specification
NO | Items | Description | |
1 | Nominal Voltage | 12.8V | |
2 | Normal Capacity | 20Ah | |
3 | Internal Resistance | ≤50mΩ | |
4 | Battery operation temperature range @charging | 0~45℃ | |
5 | Normal charge voltage | 14.6±0.1V | |
6 | Recommended float charge voltage(for Standby use) | 13.9±0.1V | |
7 | Allowed MAX charge current | 20A@Battery initial Temp 25±5℃ | |
8 | Recommended charge current | ≤10A | |
9 | Battery operation temperature range @discharging | -20~60℃ | |
10 | Output Voltage Range | 8.0~14.6V | |
11 | Allowed discharge current | 30A withstand 30min @Battery initial Temp 25±5℃ | |
12 | Recommended discharge current | ≤20A | |
13 | Pulse discharge current | 55A withstand 3s | |
14 | Discharge Cut-off voltage | 8.0V | |
15 | Dimension | Length 180.5±2mm | |
Width 76±2mm | |||
Height 166±2mm | |||
16 | Weight | Approx. 3.0Kg | |
17 | Storage Temperature & Humidity Range | Short: within one month | -20~35℃, 45~75%RH |
Long term: above one month | -10~30℃, 45~75%RH | ||
18 | Self-discharge rate | Residual capacity | ≤3% per month; ≤15% per year |
Reversible capacity | ≤1.5%per month; ≤8% per year |
3. Electrical Characteristics & Test Condition
@Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.
NO | Items | Criterion | Condition | |
1 | Internal Impedance | ≤50mΩ | Test the internal resistance of 50% SOC battery pack with 1kHz AC internal resistance test instrument. | |
2 | Capacity | ≥20Ah | Rest for 1 hour after fully charged, then discharge with 0.33C current until the battery reaches the discharge cutoff voltage. Repeat above process for three times, if the discharge time is not less than 180 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity. | |
3 |
Short circuit protection | Automatically cutoff discharging when short circuit, and release after remove the lead. | Connect the positive and negative of this battery pack through a lead with the resistance less than 5mΩ. | |
4 | MAX charge Current | 20A | Charging with this current for more than 0.5h and the added temperature of battery pack less than 20℃. | |
5 | MAX discharge Current | 30A | Discharging with this current for more than 0.5h and the added temperature of battery pack less than 35℃. | |
6 |
Cycle life (DOD%100) | ≥2000cycle | Discharge with the current of 0.5C until it can’t discharge, and then rest it for 1h. Charge the battery following CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life. | |
7 |
Discharge Temperature Characteristics | -20℃ | ≥70% | At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage. Record the ratio between discharging & charging capacity. |
0℃ | ≥80% | |||
25℃ | 100% | |||
55℃ | ≥95% | |||
8 | Charge Retention ability | remain capacity≥90% | Charge the battery to full capacity and store it for 28days, and then discharge it with 0.33C to the cut-off voltage. |
4. Storage & Transportation
5. Our service
6. LED light battery 12V 20Ah dimension
Your inquiry will be warmly welcomed, looking forward to our long term cooperation.